FreeLists / si-list / [SI-LIST] EPD Guidelines

["sreekanthn" <sreekanthn@xxxxxxxxxxxxxxx>]

Dear Experts,

             I would like to know the dos and don'ts while designing a board
which is going for a mass production as a commercialized consumer electronic
product. Is there any books/resource as an Electronic Product Design
document ?
             My main area of concern is the Board design including PCB and
mechanical design guidelines for mass production.

Kindly comment.

Best Regards,
Sreekanth N Nampoothiri.


The information contained in this electronic message and any attachments to 
this message are intended for the exclusive use of the addressee(s) and may 
contain proprietary, confidential or privileged information. If you are not the 
intended recipient, you should not disseminate, distribute or copy this e-mail. 
Please notify the sender immediately and destroy all copies of this message and 
any attachments contained in it.

Contact your Administrator for further information.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu