|
[si-list]
||
[Date Prev]
[02-2007 Date Index]
[Date Next]
||
[Thread Prev]
[02-2007 Thread Index]
[Thread Next]
[SI-LIST] Total Least Squares Method
- From: Zhangkun <zhang_kun@xxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Sat, 17 Feb 2007 14:16:23 +0800
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
Dear All
Recently, we are studying to get IC current noise source based on the
measurement noise. Because there is some unavoidable error, the current
source would be wrong. I noticed that somebody is using "Total Least Square"
method to eliminate the error. I want learn about this method. Any advice
would be helpful.
Best Regards
Zhangkun
2007-2-17
-- Binary/unsupported file stripped by Ecartis --
-- Type: image/jpeg
-- File: image001.jpg
-- HTML Attachment decoded to text by Ecartis --
-- File: header.htm
----------------------------------------------------------------------------
----------------------------------------------------------------------------
----------------------------------------------------------------------------
----------------------------------------------------------------------------
文档名称
文档密级
TIME \@ "yyyy-M-d" 2007-2-17
华为机密，未经许可不
得扩散
第PAGE1页, 共NUMPAGES \* Arabic \* MERGEFORMAT 1页
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
