FreeLists / si-list / [SI-LIST] PCB Fab Costs

["Christopher McGrath" <christopher.mcgrath@xxxxxxxxxxx>]

We are in the process of developing some cost analysis tools for our PCB
costs and I was wondering if anybody out there had run across some
resources out there that were worth looking at.  
 

For instance, I am interested in any common methods for calculating some
kind of "complexity factor" based on common inputs such as layer count,
lamination cycles, panelization, board area, drill count, drill size,
etc. for cost and schedule planning and for comparing designs of varying
complexity.

 

Thanks,

Chris

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu