
|
[si-list]
||
[Date Prev]
[02-2007 Date Index]
[Date Next]
||
[Thread Prev]
[02-2007 Thread Index]
[Thread Next]
[SI-LIST] Re: Will ODT on DDR2 work?
- From: Jory McKinley <jory_mckinley@xxxxxxxxx>
- To: Ludvik@xxxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Mon, 5 Feb 2007 18:14:57 -0800 (PST)
Hello Ludvik,
In my experience it always a good idea to simulate this transfer but we have
found that using Full ODT drivers on the Micron side tend to create some
undesirable Signal Integrity issues at the Controller (in your case the
Virtex-V). In most cases a Half strength ODT driver will work however you will
need to simulate this while checking for overshot and ringback at the Virtex-V.
Also make sure that you have adequate crosstalk rules in place.
-Jory
Ludvik Kindl <Ludvik@xxxxxxxxxx> wrote: Gentlemen,
I will be interfacing 244-pin Mini-DIMM - DDR2-667 from Micron to Xilinx's
Virtex-5 and I want to use ODT instead of discrete resistors. Do you know
about any potential problem I will be facing on Virtex-5 or Micron side?
Regards,
Ludvik J. Kindl, MSEE
BEKERA CONSULTING, Inc.
751 Laurel Street, #122
San Carlos, California 94070
Cell: 650-868-2675
www.bekera.com
Ludvik@xxxxxxxxxx
helping engineers resolve their signal integrity issues
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
---------------------------------
Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get
things done faster.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|