FreeLists / si-list / [SI-LIST] HSPICE - adding jitter to ethernet serial link

["Ali Burney" <aburney@xxxxxxxxxx>]

Hi,
 

I am running gigabit Ethernet link simulation using HSPICE and have a
question on adding jitter to the transmitted data. Is there any way to
add Gaussian jitter to the transmitted data?  I know that tools such as
Hyperlynx allow you to add transmit jitter. 

 

Thanks and best regards,

 

A Burney

 

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu