Go to the FreeLists Home Page Home Signup Help Login
 



[si-list] || [Date Prev] [02-2005 Date Index] [Date Next] || [Thread Prev] [02-2005 Thread Index] [Thread Next]

[SI-LIST] Re: - Difference between High Current Low Voltage and Low Current High Voltage circuits

  • From: "Thiago Wellington Joazeiro Almeida" <tjoazeiro@xxxxxxxxxxxx>
  • To: <rajneesh.raveendran@xxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
  • Date: Tue, 1 Feb 2005 15:52:21 -0200
 Hi Rajneesh

   The power is related to capacitance, frequence and voltage. P =3D =
C*f*V^2, so if you apply 1.5V the power will be much lower than if you =
apply 3.3V.

Regards,

Thiago Almeida



-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of
rajneesh.raveendran@xxxxxxxxx
Sent: Tuesday, February 01, 2005 4:32 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] - Difference between High Current Low Voltage and Low
Current High Voltage circuits


Hello All,

My apologies as I feel this question may not be directly related to
SI-LIST.

Today's processors are using very low voltages at high currents (e.g.
currents in the range of 20-30 A at 1.2 to 1.5 V of core operation). I
would like to know whether the manufacturers of chips get any additional
benefit by going to high currents at low voltages. What will be the
situation like if you use low currents at high voltages (say 3.3V or
5V)? My premise is that the power consumption being the product of
voltage and current is the same (e.g. 20A @ 1.5V is the same as 9.09A @
3.3V).

Regards,
Rajneesh







Confidentiality Notice

The information contained in this electronic message and any attachments =
to this message are intended
for the exclusive use of the addressee(s) and may contain confidential =
or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or =
Mailadmin@xxxxxxxxx immediately
and destroy all copies of this message and any attachments.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:    =20
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
 =20

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  





[ Home | Signup | Help | Login | Archives | Lists ]

All trademarks and copyrights within the FreeLists archives are owned by their respective owners.
Everything else ©2007 Avenir Technologies, LLC.