FreeLists / si-list / [SI-LIST] placement of bias resistors on differential traces

[si-list] || [Date Prev] [02-2003 Date Index] [Date Next] || [Thread Prev] [02-2003 Thread Index] [Thread Next]

[SI-LIST] placement of bias resistors on differential traces

From: "FROMMANN,NIELS (HP-Cupertino,ex1)" <niels_frommann@xxxxxx>
To: silist <si-list@xxxxxxxxxxxxx>
Date: Mon, 3 Feb 2003 17:10:42 -0500

Hello SI-LIST,

if have a question about the placement of bias resistors
on a differential trace: 

- does it matter where the resistors are placed along the trace
  (beginning, middle or end)?
- should the resistors be placed at the same relative location
  so the discontinuity of the resistor pads appear on both traces
  at the same time?

Thanks,

Niels.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu