To: <hreidmarkailen@xxxxxxxxx>, "si-list" <si-list@xxxxxxxxxxxxx>
Date: Wed, 10 Jan 2007 13:08:21 -0800
Geez, not a nice way to discredit a solution in a public forum which has =
been in use and working for many years by the electronics design =
community.
Perhaps some product training, ae help or support can be leveraged to =
assist with your problems or conerns.
Carlos Moll
Cadence Design Systems
-----Original Message-----
From: agathon [mailto:hreidmarkailen@xxxxxxxxx]
Sent: Wednesday, January 10, 2007 12:45 PM Pacific Standard Time
To: si-list
Subject: [SI-LIST] Re: Hyperlynx vs Signal Explorer
I recently received a comment about just this from an acquaintance:
----
"Short answer: anyone trying to make full use of Cadence pcb si tools =
for
interconnect sim and who, nevertheless, recommends it could make good =
use of
counseling of some kind... or the receivers of that info could make good =
use
of a polygraph test on the one recommending. All this based on 1st =
hand
experience over time."
----
No info on Hyperlynx.
On 1/9/07, cdomeny <craig.domeny@xxxxxxxx> wrote:
>
> We are considering adding a base-model (<GHz) SI tool to our PCB =
design
> flow and have looked at Mentor Hyperlynx EXT and Cadence Orcad Sig
> Explorer. In research, it seems the Cadence tool does not actually
> perform "physical extraction", but is able to do a post-layout =
analysis
> somehow. Can anyone help?
>
> Hyperlynx "seems" more mature, but cost ~2X. However, we are concerned
> also about post-layout, and if Hyperlynx actually extracts the layout,
> it seems like a more robust method.
>
> Any help, insight, or guidance is appreciated.
>
> Thanks, - Craig
>
> ------------------------------------------------------------------
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
