FreeLists / si-list / [SI-LIST] SV: Re: Mentor to XTK translation problem

["Anders Ekholm (EAB)" <Anders.Ekholm@xxxxxxxxxxxxxxx>]

When you run tmp check that you do not get models for both options at =
the
same time in the database. I suppose only one option at a time will be =
mounted.
You could always remove one of them by what-if in xns.

BR /Anders Ekholm

-----Ursprungligt meddelande-----
Fr=E5n: Perry Qu [mailto:perry.qu@xxxxxxxxxxx]
Skickat: den 8 januari 2003 21:05
Till: si-list
=C4mne: [SI-LIST] Re: Mentor to XTK translation problem



Well, just got an answer for my own question. This is from Mentor =
technical
support:

Add the following option in quad.gcf file:

ALLOW_PIN_OVERLAPS =3D TRUE

"isf2xtk" proceed with some errors related to stuffed option, but it is =
a
progress compared with previous  simulation when isf2xtk just stopped. =
Will
check out the xtk files.

Cheers

Perry
Perry Qu wrote:

> Hi,
>
> I was doing a postlayout simulation for one of our design and have =
the
> following problem when I tried to translate mentor boardstation =
database
> into XTK:
>
> I got the following error when i try to do "isf2xtk":
> *E (424): [ISF] Pin 'U87-5' (11111111111111111111111111) overlaps pin
> 'U81-5' (11111111111111111111111111) on net '/POWER_INST/N$78254'.
>
> This happened because U85 and U87 are two stuffed option for one
> component.  When asking Mentor, the only "solution" they have now is
> that I have to remove one of them from the Mentor design. This is =
really
> painful and error-prone for large design. Is there a better way to do
> this ?
>
> Thanks
>
> Perry
>
> --
> Perry Qu
>
> SDN D & Q            |      600 March Road
> Alcatel Canada       |      Ottawa, ON K2K 2E6, Canada
>
> DID: (613) 7846720   |      FAX: (613) 5993642

--
Perry Qu

SDN D & Q            |      600 March Road
Alcatel Canada       |      Ottawa, ON K2K 2E6, Canada

DID: (613) 7846720   |      FAX: (613) 5993642


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:    =20
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages=20
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
 =20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu