FreeLists / si-list / [SI-LIST] Total load capacitance

[Bob Patel <whizplayer@xxxxxxxxx>]

Hi! If i am calculating the total load capacitance
faced by the driver, can i use this equation:
Ctotal = C(trace)+ C(via) +Cin(i/p cap. of load)+
Cout(o/p cap of driver)
Now if I add 5% then can I safely assume that if the
I?O is designed to drive this load then on the real
board there should not be a problem fro the driver to
source or sink current.
Thanks in advance
Bob


__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu