FreeLists / si-list / [SI-LIST] Re: Flux

["Degerstrom, Michael J." <degerstrom.michael@xxxxxxxx>]

Rich,

Could you please elaborate on your comments below?  Specifically,
what does flux or other material have to do with signal integrity?
I'm envisoning a film left on the surface of high speed microstrips
that contributes to loss.

Mike

> -----Original Message-----
> From: Rich Peyton [mailto:p2rich@xxxxxxxxxxxxx] 
> Sent: Thursday, January 03, 2002 10:22 AM
> 
> Signal Integrity was improved with both cleaning processes 
> but there was a small percentage that still had 
> contaminates/film left behind which had effects on high speed 
> testing ( Kester being the worst ).
> 
> Any comments/ articles/ web info / data would be appreciated :-)
> 
> Thanks to those who reply,
> 
> Rich
> 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu