|
[openbeosnetteam]
||
[Date Prev]
[06-2003 Date Index]
[Date Next]
||
[Thread Prev]
[06-2003 Thread Index]
[Thread Next]
[openbeosnetteam] Re: Testing..
- From: Philippe Houdoin <philippe.houdoin@xxxxxxx>
- To: openbeosnetteam@xxxxxxxxxxxxx
- Date: Thu, 19 Jun 2003 16:52:03 +0200 (CEST)
> What is supposed to work, and what isn't, during the testing of the
> network kit?
AFAIK, are currently broken:
* raw module: don't load
* arp, ping & traceroute: don't work, due to raw module issue
* libnetapi: no BNetEndpoint class yes, so any BeOS apps reliying on this C++
socket wrapper will failed on "Symbol missing"
* libnet.so DNS resolver: don't work well, so use only absolute IP address...
Should work:
* ifconfig: you should see interfaces (-a options), loopback and your
ethernet card, and you should be able to set interfaces up, down, ip address
(es) and mask(s).
* route: you should see routes, and be able to modify/add/delete them.
* ipv4, icmp, upd and tcp protocols should works.
* netpositive: was reported to work. I never reproduce this *feature* myself...
-Philippe
|
|
