FreeLists / openbeosnetteam / [openbeosnetteam] Can't get net_srv to work with a SIS 900 card.

["Bruno G. Albuquerque" <bga@xxxxxxxxxxxxx>]

Ok... Here is what I got:

[/boot/home/development/cvs/openbeos/net_kit/source/server]> net_srv
Net Server Test App!
====================

add_protocol: ICMP (v4)
add_protocol: IPv4
add_protocol: UDP Module

Domain: internet
        ICMP (v4) provided by modules/protocol/icmp
        IPv4 provided by modules/interface/ipv4
        UDP Module provided by modules/protocol/udp
find_interface modules
I couldn't find any drivers in the api driver directory
open_device: /dev/net/rtl8139/0
Unable to open /dev/net/rtl8139/0, -1 [General OS error]
open_device: /dev/net/sis900/0
adding device sis9000
adding device loop0
done findinf interfaces
ether_dev_start sis9000
loop0: starting rx_thread...
loop0: starting tx_thread...
Dev Name         MTU  MAC Address       Flags
=== ============ ==== ================= ===========================
 1  sis9000       1500                   UP RUNNING BROADCAST MULTICAST
                 Addresses:
ETHERNET: Interface sis9000 has a link layer address of 
00:40:33:e1:63:ef
 2  loop0       16384                   UP RUNNING MULTICAST
                 Addresses:
Interface loop0 has a link layer address of
starting socket creation test...
soo_ioctl gave -2147454965
ifr.flags = 0
soo_ioctl gave -2147454965
error -2147454965 [No such device]
SIOCSIFADDR
in_ifaddr:
         : ia_net          : 0000007f
         : ia_netmask      : 000000ff
         : ia_subnet       : 0000007f
         : ia_subnetmask   : 000000ff
         : ia_netbroadcast : 00000000
         : ia_addr         : 0100007f
         : ia_dstaddr      : 00000000
         : ia_sockmask     : 000000ff
soo_ioctl gave 0
Trying to send 11 bytes data
udp_input: hdrlen = 20
udp->length = 19
udp: checking cksum
doing in_pcblookup for 7f000001:7772 7f000001:7773
calling sbappendaddr (0x80004018)
waking up socket!
sendit gave 0, rw = 11
recvit gave 0, rw = 11
got 11 bytes
[Hello World]
Came from 7f000001:7772
Dev Name         MTU  MAC Address       Flags
=== ============ ==== ================= ===========================
 1  sis9000       1500                   UP RUNNING BROADCAST MULTICAST
                 Addresses:
ETHERNET: Interface sis9000 has a link layer address of 
00:40:33:e1:63:ef
 2  loop0       16384                   UP RUNNING MULTICAST
                 Addresses:
Interface loop0 has a link layer address of
IPv4: 127.0.0.1
device sis9000 : rx_thread = -1
device loop0 : rx_thread = 267
[/boot/home/development/cvs/openbeos/net_kit/source/server]>

So, the rx_thread returns -1... Any ideas why? I guess this is why my 
net_srv does not stay loaded. :P

-Bruno


--
Fortune Cookie Says:

First Rule of History:
        History doesn't repeat itself -- historians merely repeat each
other.