FreeLists / openbeosnetteam / [openbeosnetteam] Re: More route stuff

["Brennan Cleveland" <warriorspot@xxxxxxxxxxxxx>]

Waldemar,

I have been out of commission for a few weeks.  I have my final
project for my CS degree to work on for the next four weeks as well
as the previous 5 or so.  It is a group project, but I am doing all
the work!

I will update my source tree with the latest cvs and see if I still
panic on the route change.  I hope to have more time to write up a
formal test plan for route.   I write test plans all day at work, so
Im more motivated to code than write test plans ;).  I too only
configure loop0 and rtl81390, so it's good we have similar
pre-conditions...

I looked at your PPP email as well, I will write a separate response
to that in about 5 minutes :)

Brennan

---- Original Message ----
From: Waldemar.Kornewald@xxxxxx
To: openbeosnetteam@xxxxxxxxxxxxx
Subject: RE: [openbeosnetteam] Re: More route stuff
Date: Wed, 31 Mar 2004 17:29:34 +0200

>Hi Brennan,
>
>> I was able to add a default route: route add default 192.168.0.1
>> Using that I can ping hosts out on the internet with no problems.
>> I can ftp anywhere.
>> I was able to use route delete default, confirm it was deleted,
>then add 
>> it again with no problem.
>> Here's a good one though: route change default sent me into kernel 
>> debugger land (twice).
>
>I finally came to testing this myself, but unfortunately
>route show
>does not work (it never returns...maybe a deadlock somewhere?),
>whereas route add/delete returned without any error as you said. I
>only configured loop0 and rtl81390. PPP was not running, so this
>cannot be the problem.
>Route change default returned successfully, so I could not reproduce
>your error.
>Could you please check if it still works alright?
>
>Philippe, did you test this?
>
>Bye,
>Waldemar
>