Hi:
You must do the following:
I have put a * in front of what is most likely stopping you from selecting
the boot.bin file.
If the Nero Wizard starts, click the Close Wizard button.
*1.) Select CD-ROM (Boot)
*2.) Select Image file from Source of boot image data
*3.) Set Kind of emulation: to No Emulation
*4.) Set Load segment of sectors (hex!): to 07C0
*5.) Set Number of loaded sectors: to 4
6.) Press the Browse... button
***Select All Files () from File of type): {This is most probably your main
problem}
Locate the BootSector file (boot.bin) in the folder.
*Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)
*Set Format to Mode 1
*Set Character Set to ISO 9660
*Check the Joliet check box
*Check all Relax ISO Restrictions
*Select ISO9660 from the drop down box.
HTH
Regards,
Terrill Reynolds,
E-mail: terrill1@xxxxxxxx
Messenger/Hotmail:terrillreynolds36@xxxxxxxxxxx
Yahoo:terrillreynolds
AIM:terrill36
PH: 910-842-7701
----- Original Message -----
From: "Armando Maldonado" <armando_maldonado@xxxxxxxxxxxxx>
To: <jawslite@xxxxxxxxxxxxx>
Sent: Wednesday, May 14, 2008 3:53 PM
Subject: [JAWSLite] windows unattended setup
Hello, I'm trying to learn how to use windoes unattended setup kit and am
running into trouble burning the cd with nero 6. When I load the boot.bin,
nero tells me that this is an incompatible format. Can someone please help
or advise what I shall do so I can burn my copy with the anser file? Thanks.
armando
P.S. I have listened to some audio podcasts and they don't explain much.
===================
Take your shshopping life back at http://tinyurl.com/32rsxz
View the list's information at
http://www.freelists.org/list/jawslite
===================
Take your shshopping life back at http://tinyurl.com/32rsxz
View the list's information at
http://www.freelists.org/list/jawslite
