[PCB_FORUM] Re: NC Drill file output

["Chad Saathoff" <chads@xxxxxxxxxxx>]

Once you change the root file name for the NC Drill, it writes that data
to the nc_param.txt file for that project.  If you open that file up in
a text editor, delete the line that is setting the file name, save and
rerun NC Drill, it will default back to its original behavior.

Chad

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Thursday, October 04, 2007 9:52 AM
To: Cadence User Group
Subject: [PCB_FORUM] NC Drill file output

Hi all,
We have Allegro v-15.7. Running NC Drill has been working great until
now.
How can I force it to name the .drl file whatever the .brd (design name)
is.
I changed the ncdrill output filename to test.drl, now it always comes
up as test.

It no longer automatically names the output .drl file the same as the
root brd.
I also tried having NO NAME in the Root File Name field.
Still no luck!

Thanks,
Mark


________________________________________________________________________
_____
Scanned by IBM Email Security Management Services powered by
MessageLabs. For more information please visit http://www.ers.ibm.com
________________________________________________________________________
_____
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

• Follow-Ups:
  • [PCB_FORUM] Re: NC Drill file output
    • From: Mark Salberg

• References:
  • [PCB_FORUM] NC Drill file output
    • From: Mark Salberg

Other related posts:

[PCB_FORUM] NC Drill file output

[PCB_FORUM] Re: NC Drill file output

[PCB_FORUM] Re: NC Drill file output