[PCB_FORUM] Re: Renumbering Desingations Starting with 1000
From: "Blake, Mark L" <mark.l.blake@xxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Fri, 9 Sep 2005 23:12:00 -0700
Include the following line in env file
SET FST_REF_DES=300
Where 300 is replaced by # that you want to start with use to work,
haven't tried it in a while.
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello
Sent: Thursday, September 08, 2005 1:27 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Renumbering Desingations Starting with 1000
Good afternoon fellow designers,
Is there any way (in V15.5) to resequenced (renumber) component
designations but start at x1000 (ie., R1000, C1000, U1000)? Please and
thanks in advance.
Vincent Di Lello, CID+
Senior CAD Designer
Kaleidescape Canada, Inc.
vdilello@xxxxxxxxxxxxxxxx
(v) 519.772.6418
(f) 519.772.6401
www.kaleidescape.com
