Sorry, I'm using 15.7.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Marcus J.
Sent: Monday, July 21, 2008 5:19 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Import/Export text blocks
Which software release are you using? File->Export->Parameters will allow
you export the text sizes from one design and import it into another design
if you are using 16.01
----- Original Message -----
From: "Joe.witten" < <mailto:joe.witten@xxxxxxxxxxx> joe.witten@xxxxxxxxxxx>
To: < <mailto:icu-pcb-forum@xxxxxxxxxxxxx> icu-pcb-forum@xxxxxxxxxxxxx>
Sent: Monday, July 21, 2008 7:49 PM
Subject: [PCB_FORUM] Import/Export text blocks
>I seem to remember a post where some explained how to export the list of
> Allegro text blocks from one design and import them back into another.
I've
> searched through the archives, but I can't find the thread. Can someone
> repost this or point me to it?
>
> Thanks,
> Joe
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to <mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
<http://www.freelists.org/archives/icu-pcb-forum/>
http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to <mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
