Browse icu-pcb-forum: This Month's Archive • Main Archive Page • Related posts • Previous by Date • Next by Date

[PCB_FORUM] Re: Artwork error

From: "Sten Gustavson (sgustavs)" <sgustavs@xxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Wed, 2 Jul 2008 10:00:15 -0400

If the void error is not immediately obvious, check how many shapes there are.

I ran into this just a couple of days ago. I had been z-copying shapes, and had 
accidentally created multiple iterations of the same shape on the same layer. 
Deleting all but 1 fixed the problem. 


Sten Gustavson
CAD Applications Engineer
Cisco Systems Inc.
1414 Massachusetts Ave.
Boxborough, MA 01719

Email: sgustavs@xxxxxxxxx

Tel: (978)936-0229

This e-mail may contain confidential and privileged material for the sole use 
of the intended recipient. Any review, use, distribution or disclosure by 
others is strictly prohibited. If you are not the intended recipient (or 
authorized to receive for the recipient), please contact the sender by reply 
e-mail and delete all copies of this message.


"Those who wish to sing always find a song."


-- Swedish Proverb
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Nha Le
Sent: Wednesday, July 02, 2008 6:39 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Artwork error

Hi all,
When I create artwork, an error message is displayed says that: 
ERROR: aborting film - Shape with first seg=(644.327 503.002) [layer=TOP]
 has a void with extents [(-625.002 574.998) (525.002 655.002)] that touches
 another shape with first seg=(-555.945 639.370). Manually resolve problem.
    ERROR: aborting film - artwork will not be generated!
 Error in TOP--halting output.  Artwork file not generated.
 *** ERROR with TOP
How can I abort this error and generate this artwork file?
Thanks in advance.


      
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Follow-Ups:

[PCB_FORUM] Re: Artwork error
From: COMPEAU,DENNIS

References:
- [PCB_FORUM] Artwork error
  - From: Nha Le

[PCB_FORUM] Re: Artwork error

Other related posts: