This may be one of the bugs in Allegro. Which level are you using? Do you have
the latest ISR patch?
In one of the 15X levels dynamic shapes with voids would implode making the
shape causing the error to be invisble. Go to display and make sure that your
"stackup" "boundary layer" is turned on, if you can find the shape delete it
and start again.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Nha Le
Sent: Wednesday, July 02, 2008 6:39 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Artwork error
Hi all,
When I create artwork, an error message is displayed says that:
ERROR: aborting film - Shape with first seg=(644.327 503.002) [layer=TOP]
has a void with extents [(-625.002 574.998) (525.002 655.002)] that touches
another shape with first seg=(-555.945 639.370). Manually resolve problem.
ERROR: aborting film - artwork will not be generated!
Error in TOP--halting output. Artwork file not generated.
*** ERROR with TOP
How can I abort this error and generate this artwork file?
Thanks in advance.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
