Date Index for icu-pcb-forum, 06-2005

[icu-pcb-forum] || [06-2005 Date Index] [06-2005 Thread Index]

[PCB_FORUM] Re: =Problem with an edge connector - Kevin McCowan
[PCB_FORUM] Re: =Problem with an edge connector - westfeldt
[PCB_FORUM] Re: =?windows-1255?Q?תשובה:_IPC_PROBLEM_IN_EDGE_CONNECTOR?X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0 - Gary MacIndoe
[PCB_FORUM] Highlighting nets - Garrett Gilbertson
[PCB_FORUM] Re: Highlighting nets - Kevin McCowan
[PCB_FORUM] Re: Highlighting nets - Garrett Gilbertson
[PCB_FORUM] Re: Highlighting nets - Kevin McCowan
[PCB_FORUM] Re: Highlighting nets - Julian Ungureanu (jungurea)
[PCB_FORUM] Re: Highlighting nets - Jim Goshorn
[PCB_FORUM] version mismatches - westfeldt
[PCB_FORUM] Re: version mismatches - chris . ball
[PCB_FORUM] Re: version mismatches - Isaacson, Lynn
[PCB_FORUM] Re: version mismatches - Daniel So
[PCB_FORUM] Re: version mismatches - Eric Hufstedler
[PCB_FORUM] Re: version mismatches - westfeldt
[PCB_FORUM] Re: version mismatches - gary
[PCB_FORUM] Change grid - Sam Hung
[PCB_FORUM] Re: Change grid - Dave Elder
[PCB_FORUM] Re: Change grid - Eric Hufstedler
[PCB_FORUM] Managing a Cadence Library with the Matrix PDM Tool - Coombs, William B. (US SSA)
[PCB_FORUM] Re: Change grid - westfeldt
[PCB_FORUM] exporting .dxf files from Allegro - Kathy Mitchell
[PCB_FORUM] Re: exporting .dxf files from Allegro - Reade, Sue
[PCB_FORUM] Re: exporting .dxf files from Allegro - Mike Wilson
[PCB_FORUM] Re: exporting .dxf files from Allegro - Mark Salberg
[PCB_FORUM] Re: Change grid - Eric Hufstedler
[PCB_FORUM] Re: exporting .dxf files from Allegro - Eric Hufstedler
[PCB_FORUM] Re: Change grid - icu-pcb-forum
[PCB_FORUM] Re: exporting .dxf files from Allegro - Kathy Mitchell
[PCB_FORUM] Re: Change grid - Carolyn . Schaefer
[PCB_FORUM] while creating part, cant save it - sjcharles
[PCB_FORUM] Re: while creating part, cant save it - sjcharles
[PCB_FORUM] Drill Symbol created by "Macros".... - Judy Huang
[PCB_FORUM] Re: Drill Symbol created by "Macros".... - Eric Hufstedler
[PCB_FORUM] Re: Drill Symbol created by "Macros".... - Judy Huang
[PCB_FORUM] Re: Drill Symbol created by "Macros".... - Samuel Cais
[PCB_FORUM] Re: Change grid - Isaacson, Lynn
[PCB_FORUM] Re: Managing a Cadence Library with the Matrix PDM Tool - Noble, Jan
[PCB_FORUM] shape error - help needed URGENT - Sumathi Kuppuswamy
[PCB_FORUM] Re: shape error - help needed URGENT - sjcharles
[PCB_FORUM] Any comments on MakeDo? - Austin Franklin
[PCB_FORUM] Re: Any comments on MakeDo? - Dave Schaefer
[PCB_FORUM] Re: Any comments on MakeDo? - Austin Franklin
[PCB_FORUM] Re: Any comments on MakeDo? - Dave Schaefer
[PCB_FORUM] Re: Any comments on MakeDo? - Austin Franklin
[PCB_FORUM] Re: exporting .dxf files from Allegro - Mike Wilson
[PCB_FORUM] 回复： Re: exporting .dxf files from Allegro - quest cds
[PCB_FORUM] Dear Cadence, can you please... - David Greig
[PCB_FORUM] Re: shape error - help needed URGENT - Sumathi Kuppuswamy
[PCB_FORUM] Re: Any comments on MakeDo? - Mark Salberg
[PCB_FORUM] Re: Any comments on MakeDo? - Austin Franklin
[PCB_FORUM] Re: Any comments on MakeDo? - Mark Salberg
[PCB_FORUM] Acrobat 7 and ConceptHDL - William Billereau
[PCB_FORUM] Re: Change grid - Carolyn . Schaefer
[PCB_FORUM] Re: Acrobat 7 and ConceptHDL - toswanstrum
[PCB_FORUM] Re: Acrobat 7 and ConceptHDL - William Billereau
[PCB_FORUM] Allegro button malfunction - Kipnis, Oleg
[PCB_FORUM] Re: shape error - help needed URGENT - Kevin McCowan
[PCB_FORUM] Re: Drill Symbol created by "Macros".... - Kevin McCowan
[PCB_FORUM] Prop Delay Constraint in 15.2 - Alexis.Meehan
[PCB_FORUM] Re: Allegro button malfunction - george . h . patrick
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Austin Franklin
[PCB_FORUM] Powers routing... - Kevin McCowan
[PCB_FORUM] Re: while creating part, cant save it - richard moffat
[PCB_FORUM] Re: shape error - help needed URGENT - Sumathi Kuppuswamy
[PCB_FORUM] Re: Powers routing... - Hugh Allen
[PCB_FORUM] Re: Powers routing... - Kevin McCowan
[PCB_FORUM] Re: shape error - help needed URGENT - Kevin McCowan
[PCB_FORUM] Re: Managing a Cadence Library with the Matrix PDM Tool - Coombs, William B. (US SSA)
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - SjChar3
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Austin Franklin
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - JACK KELLY
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - orit dwek
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Austin Franklin
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Samuel Cais
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Blake, Dave
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Austin Franklin
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - ryan . donna
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Austin Franklin
[PCB_FORUM] Re: Managing a Cadence Library with the Matrix PDM Tool - Noble, Jan
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Austin Franklin
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Jonathan Friedman
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Jonathan Friedman
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - Mark Salberg
[PCB_FORUM] Re: Prop Delay Constraint in 15.2 - sreedath
[PCB_FORUM] Re: Not able to print pdf's - Gene Norris
[PCB_FORUM] Re: Not able to print pdf's - Austin Franklin
[PCB_FORUM] search and replace all - sjcharles
[PCB_FORUM] Re: search and replace all - westfeldt
[PCB_FORUM] Re: search and replace all - sjcharles
[PCB_FORUM] Re: search and replace all - westfeldt
[PCB_FORUM] Re: search and replace all - sjcharles
[PCB_FORUM] Demo or Training Package - Bob McCreight
[PCB_FORUM] Re: Demo or Training Package - NAT9
[PCB_FORUM] Re: search and replace all - rjbzxr
[PCB_FORUM] Re: Demo or Training Package - Austin Franklin
[PCB_FORUM] Change net properties on a trace... - Gene Carman
[PCB_FORUM] Re: search and replace all - sjcharles
[PCB_FORUM] Re: search and replace all - westfeldt
[PCB_FORUM] Re: Demo or Training Package - Andrew W. Riley III
[PCB_FORUM] Soft to hard location (Concept v.15.1) - Mark Salberg
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Kevin McCowan
[PCB_FORUM] Re: Change net properties on a trace... - Kevin McCowan
[PCB_FORUM] scheduling violations? - Austin Franklin
[PCB_FORUM] Re: scheduling violations? - Kevin McCowan
[PCB_FORUM] Re: scheduling violations? - William Gerner
[PCB_FORUM] Re: scheduling violations? - Austin Franklin
[PCB_FORUM] HELP, winning value but no location - Gene Norris
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Mark Salberg
[PCB_FORUM] Re: Change net properties on a trace... - Patricia Mayer
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Patricia Mayer
[PCB_FORUM] Re: Acrobat 7 and ConceptHDL - Gene Norris
[PCB_FORUM] viewlogic hierarchy - icu-pcb-forum
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Mark Salberg
[PCB_FORUM] Re: viewlogic hierarchy - Austin Franklin
[PCB_FORUM] Re: viewlogic hierarchy - JACK KELLY
[PCB_FORUM] Re: viewlogic hierarchy - Austin Franklin
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - William Gerner
[PCB_FORUM] Re: HELP, winning value but no location - Kevin McCowan
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Kevin McCowan
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Patricia Mayer
[PCB_FORUM] Re: HELP, winning value but no location - Gene Norris
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Munoz, Juan
[PCB_FORUM] Re: search and replace all - Bolman, Shirley H
[PCB_FORUM] Re: search and replace all - westfeldt
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Bolman, Shirley H
[PCB_FORUM] Re: version mismatches - John Horner
[PCB_FORUM] Re: version mismatches - westfeldt
[PCB_FORUM] Re: version mismatches - Ooi, Ching Leong
[PCB_FORUM] Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Peter Sørensen
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - David Greig
[PCB_FORUM] Re: scheduling violations? - Tim Woytek
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - icu-pcb-forum
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Mark Salberg
[PCB_FORUM] Re: Soft to hard location (Concept v.15.1) - Dave Mattice
[PCB_FORUM] Kelvin part - Garrett Gilbertson
[PCB_FORUM] Re: Kelvin part - george . h . patrick
[PCB_FORUM] Re: Kelvin part - Scott, Ron
[PCB_FORUM] Re: search and replace all - sjcharles
[PCB_FORUM] Re: search and replace all - Bolman, Shirley H
[PCB_FORUM] To find out date stamp of library used.. - Ooi, Ching Leong
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Peter Sørensen
[PCB_FORUM] Re: search and replace all - sjcharles
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Peter Sørensen
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Rob Blomström
[PCB_FORUM] Re-order entries in Setup / Subclasses/ Board Geometry - Vince Di Lello
[PCB_FORUM] Re: Re-order entries in Setup / Subclasses/ Board Geometry - David Greig
[PCB_FORUM] Re: Re-order entries in Setup / Subclasses/ Board Geometry - Andrew Noonan
[PCB_FORUM] Re: Update symbol of older board file takes forev er in Alegro 15.2s80 windows version. (what is uprev) - george . h . patrick
[PCB_FORUM] auto referencing and hierarchy in capture - Eric Hufstedler
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Peter Sørensen
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Peter Sørensen
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Rob Blomström
[PCB_FORUM] Drill Chart on Allegro 15.2 - Kipnis, Oleg
[PCB_FORUM] Re: Update symbol of older board file takes forever in Alegro 15.2s80 windows version. (what is uprev) - Peter Sørensen
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Michael . Catrambone
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - westfeldt
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Gary MacIndoe
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Michael . Catrambone
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Kipnis, Oleg
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Michael . Catrambone
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Kipnis, Oleg
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - westfeldt
[PCB_FORUM] Re: Update symbol of older board file takes forev er in Alegro 15.2s80 windows version. (what is uprev) - george . h . patrick
[PCB_FORUM] Display holes plated and non-plated does not work. - Gene Carman
[PCB_FORUM] Re: Display holes plated and non-plated does not work. - westfeldt
[PCB_FORUM] Trace entry to pad - Sam Hung
[PCB_FORUM] Re: Trace entry to pad - westfeldt
[PCB_FORUM] Re: search and replace all - sjcharles
[PCB_FORUM] hardware on sch - sjcharles
[PCB_FORUM] Re: search and replace all - Bolman, Shirley H
[PCB_FORUM] Re: hardware on sch - Bolman, Shirley H
[PCB_FORUM] Re: hardware on sch - Eric Hufstedler
[PCB_FORUM] Re: nVidia Quadro FX1300, 128MB - Eric Hufstedler
[PCB_FORUM] Re: hardware on sch - Noble, Jan
[PCB_FORUM] Re: hardware on sch - Naren
[PCB_FORUM] Re: hardware on sch - Scott, Ron
[PCB_FORUM] Re: hardware on sch - Ritter, Alan
[PCB_FORUM] Re: Display holes plated and non-plated does not work. - Gene Carman
[PCB_FORUM] Re: hardware on sch - sjcharles
[PCB_FORUM] Re: hardware on sch - sjcharles
[PCB_FORUM] pastemask subclass package geometry - westfeldt
[PCB_FORUM] Rotating the .brd file - Budathoki, Trilok (GE Consumer & Industrial)
[PCB_FORUM] Re: pastemask subclass package geometry - Julian Ungureanu (jungurea)
[PCB_FORUM] Re: Rotating the .brd file - Allan Nørgaard
[PCB_FORUM] Re: Rotating the .brd file - Cosentino, Tony
[PCB_FORUM] Re: pastemask subclass package geometry - westfeldt
[PCB_FORUM] Re: Rotating the .brd file - Naren
[PCB_FORUM] Re: Display holes plated and non-plated does not work. - Dal Locke
[PCB_FORUM] Re: Rotating the .brd file - Jelena Larsen
[PCB_FORUM] Re: hardware on sch - Mitch S. Morey
[PCB_FORUM] Re: Rotating the .brd file - Kevin McCowan
[PCB_FORUM] Re: pastemask subclass package geometry - Kevin McCowan
[PCB_FORUM] Re: hardware on sch - sjcharles
[PCB_FORUM] Re: Display holes plated and non-plated does not work. - icu-pcb-forum
[PCB_FORUM] Re: Rotating the .brd file - icu-pcb-forum
[PCB_FORUM] BOTTOM PAD WON'T go to bottom layer - sjcharles
[PCB_FORUM] Re: BOTTOM PAD WON'T go to bottom layer - Kevin McCowan
[PCB_FORUM] Re: BOTTOM PAD WON'T go to bottom layer - sjcharles
[PCB_FORUM] test - Davies, Charles (cdavies)
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Davies, Charles (cdavies)
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - Kipnis, Oleg
[PCB_FORUM] Translating Protel to Allegro PCB file? - Austin Franklin
[PCB_FORUM] Re: Drill Chart on Allegro 15.2 - westfeldt
[PCB_FORUM] static shape question - westfeldt
[PCB_FORUM] Re: static shape question - William Gerner
[PCB_FORUM] Re: static shape question - Schwartz, Jerome
[PCB_FORUM] Re: static shape question - Barker, Karen
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - Bob McCreight
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - Mike Wilson
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - Austin Franklin
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - george . h . patrick
[PCB_FORUM] Re: static shape question - westfeldt
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - westfeldt
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - Austin Franklin
[PCB_FORUM] Re: artwork error - Kovacs, Laszlo
[PCB_FORUM] Re: artwork error - Samuel Cais
[PCB_FORUM] Re: artwork error - icu-pcb-forum
[PCB_FORUM] Re: artwork error - Gene Carman
[PCB_FORUM] Re: artwork error - Kovacs, Laszlo
[PCB_FORUM] Plotting - george . h . patrick
[PCB_FORUM] Re: Plotting - Gene Carman
[PCB_FORUM] Re: artwork error - Kovacs, Laszlo
[PCB_FORUM] Special text symbols - William Billereau
[PCB_FORUM] Re: Plotting - Kevin McCowan
[PCB_FORUM] Re: artwork error - sjcharles
[PCB_FORUM] Re: Plotting - Gary MacIndoe
[PCB_FORUM] Re: Special text symbols - Gary MacIndoe
[PCB_FORUM] Re: Plotting - george . h . patrick
[PCB_FORUM] diff pair tolerance... - Austin Franklin
[PCB_FORUM] Re: Translating Protel to Allegro PCB file? - Mitch S. Morey
[PCB_FORUM] Re: Special text symbols - Bolman, Shirley H
[PCB_FORUM] Re: Special text symbols - Kevin McCowan
[PCB_FORUM] Re: Special text symbols - Dave Elder
[PCB_FORUM] properties... is there a way to see the properties on nets/vias/clines? - Gene Carman
[PCB_FORUM] Re: diff pair tolerance... - Naren
[PCB_FORUM] Re: properties... is there a way to see the properties on nets/vias/clines? - Naren
[PCB_FORUM] Re: diff pair tolerance... - Austin Franklin
[PCB_FORUM] Re: properties... is there a way to see the propertie s on nets/vias/clines? - ann . m . pelcha
[PCB_FORUM] autosilkutils - JACK KELLY
[PCB_FORUM] testprep - JACK KELLY
[PCB_FORUM] Re: testprep - icu-pcb-forum
[PCB_FORUM] Re: testprep - icu-pcb-forum
[PCB_FORUM] Re: testprep - icu-pcb-forum
[PCB_FORUM] Finish: Matte tin vs ENIG ? - Tom Robinson
[PCB_FORUM] Re: testprep - John LaFevers
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - Gary MacIndoe
[PCB_FORUM] single pin nets - JACK KELLY
[PCB_FORUM] Re: single pin nets - richard moffat
[PCB_FORUM] Copying planes - Gary MacIndoe
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - richard moffat
[PCB_FORUM] Re: single pin nets - george . h . patrick
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - alex forbes
[PCB_FORUM] bus routing - sjcharles
[PCB_FORUM] Re: Copying planes - Michael . Catrambone
[PCB_FORUM] Re: autosilkutils - Dave Elder
[PCB_FORUM] Re: single pin nets - JACK KELLY
[PCB_FORUM] Re: bus routing - SjChar3
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - Kevin McCowan
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - richard moffat
[PCB_FORUM] Re: bus routing - Austin Franklin
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - Alexis.Meehan
[PCB_FORUM] Re: Finish: Matte tin vs ENIG ? - richard moffat
[PCB_FORUM] Re: bus routing - Michael . Catrambone
[PCB_FORUM] "null net" color - Naren
[PCB_FORUM] Re: "null net" color - Jean Bratton
[PCB_FORUM] Re: Copying planes - Gary MacIndoe
[PCB_FORUM] Re: bus routing - sjcharles
[PCB_FORUM] Re: bus routing - Chris Brennan
[PCB_FORUM] Change Circle Diameter - Vince Di Lello
[PCB_FORUM] Re: Change Circle Diameter - Dal Locke
[PCB_FORUM] Re: Change Circle Diameter - Kevin McCowan
[PCB_FORUM] Re: Change Circle Diameter - Cosentino, Tony
[PCB_FORUM] Unssuported pads and B/B vias - Rob Blomström
[PCB_FORUM] Re: Unssuported pads and B/B vias - george . h . patrick
[PCB_FORUM] Re: Unssuported pads and B/B vias - westfeldt
[PCB_FORUM] Re: Unssuported pads and B/B vias - Schwartz, Jerome
[PCB_FORUM] Re: Change Circle Diameter - Gene Carman
[PCB_FORUM] Re: "null net" color - Mitch S. Morey
[PCB_FORUM] si and net scheduling - sjcharles
[PCB_FORUM] Re: si and net scheduling - Dal Locke
[PCB_FORUM] Re: Unssuported pads and B/B vias - westfeldt
[PCB_FORUM] Plane breaks... - Kevin McCowan
[PCB_FORUM] Re: Change Circle Diameter - Kevin McCowan
[PCB_FORUM] Re: Change Circle Diameter - george . h . patrick
[PCB_FORUM] Re: Plane breaks... - george . h . patrick
[PCB_FORUM] Re: Change Circle Diameter - Gene Carman
[PCB_FORUM] Re: Change Circle Diameter - rjbzxr
[PCB_FORUM] ?????: Re: Plane breaks... - Amin Aslan
[PCB_FORUM] Re: Change Circle Diameter - westfeldt
[PCB_FORUM] Re: Change Circle Diameter - Kevin McCowan
[PCB_FORUM] Re: Change Circle Diameter - chris . ball
[PCB_FORUM] PDM - PTC or Cadence - Andrew Smith
[PCB_FORUM] Re: [BULK] - Differential Pairs on 15.2 - Peter Sørensen
[PCB_FORUM] Re: [BULK] - Differential Pairs on 15.2 - Walter Boese Jr.
[PCB_FORUM] Re: [BULK] - Differential Pairs on 15.2 - William Gerner
[PCB_FORUM] electrical constraint manager, timing - sjcharles
[PCB_FORUM] Re: electrical constraint manager, timing - Austin Franklin
[PCB_FORUM] Re: [BULK] - Differential Pairs on 15.2 - Austin Franklin
[PCB_FORUM] Re: [BULK] - Differential Pairs on 15.2 - David Greig
[PCB_FORUM] pci express card mechanical - sjcharles
[PCB_FORUM] Re: pci express card mechanical - sjcharles