FreeLists / homeclinic / [homeclinic] Re: Black & Decker Power rachet

["Kenneth J. Kovler" <kkovler@xxxxxxxx>]

Dave;

Yes it did. I took another look at the case and there are two pins holding
the gear mechanism on the shaft. It turns out that you have to remove
these pins by knocking them out, then I was able to separate the two
halves once the gear drive was removed and get to the batteries. A little
Rejuvenation of the Ni-cads was all that was needed this time. I must of
let the thing sit too long in a discharged state.

BTW, I am looking forward to next month's Drsnews letter.

Ken

Once upon a time on Mon, 28 Apr 2003,at 9:02pm Dave Harnish wrote about:...

>
> Hi Ken,
>
> I'm not a B&D expert, but most gadgets of this type can
> be carefully pried apart using a putty knife. There are usually
> small plastic 'latches' along the edges of the 2 halves. Some
> of them can be a real pain to pop loose, but that seems to
> be a popular method of putting these together.
>
> Hope this helps a little!
>
> God bless,
>
> Dave Harnish
> Dave's Repair Service
> New Albany, PA
> drs@xxxxxxxxxx
> 570-363-2404
>
> ---
********************************************************************
To unsubscribe send 'unsubscribe homeclinic'in subject line to    
Ecartis@xxxxxxxxxxxxx
View the Archives at http://freelists.org/archives/homeclinic
********************************************************************