[gps-talkusers] Re: finding maps and changing destination
From: "don bishop" <w6smb@xxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Date: Thu, 2 Aug 2007 12:22:01 -0700
Hi Rita,
Before you start the gps program, make sure your cf card containing
the maps in the braillenote.
No, you do not have to have the receiver turned on in order to
access the maps and explore in virtual mode.
As for the Holux battery satus, the gps program can't tell you the
status of the battery. It is probably displayed on the receiver
itself, but you'd need to see the indicators to get that
information. I don't believe that information is transmitted to the
braillenote so the gps program would have no way of getting it.
Don
----- Original Message -----
From: "rita weyler" <ritaweyler@xxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Thursday, August 02, 2007 11:18 AM
Subject: [gps-talkusers] finding maps and changing destination
Hello all
I am getting a message that says no maps found. Do I need to have
the recieverr on in order for the gps to detect maps? I wanted to
practice using the gps in virtual mode.
How do I chage destination. I have tried to look up both thing in
the manual but I can't find what I want.
I also have a battery question. Does the hollex receiver tell you
when the battery is low?
Thanks lots for your help.
Rita
__________ NOD32 2433 (20070802) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
