[gps-talkusers] Re: GPS on Santa Rosa Junior College
From: Kim Casey <kim@xxxxxxxxxxxxxxxx>
To: gps-talkusers@xxxxxxxxxxxxx
Date: Thu, 11 Aug 2005 11:03:10 -0700
Jennifer,
Are there any streets in between your POIs? When the GPS software creates
a route from point A to B, it looks for the best streets to get you
there. If the area where you want to create a route lies on an area that
isn't mapped out, then you will receive an error message.
Instead of an automatic route, you will have to create a manual route in
this case. So you would have to walk the desired route between the two
POIs and mark the waypoints manually by pressing the command SPACE with K
(or dot 2 with the Braille keyboard), then type in the waypoint description
and press enter.
Hope this helps,
Kim Casey
Sendero Group LLC
At 10:13 AM 8/11/2005, you wrote:
Hi All,
Is it possible to set a route from point of interest to point of
interest? On the Santa Rosa Junior college campus various buildings are
marked (without addresses). I tried to set a route from the book store to
Analy Village with no luck Why didn't this work?
