Go to the FreeLists Home Page Home Signup Help Login
 



[arachne] || [Date Prev] [12-2007 Date Index] [Date Next] || [Thread Prev] [12-2007 Thread Index] [Thread Next]

[arachne] My ADSL is still not working ;(

  • From: Constant Brouerius van nidek <constant@xxxxxxxxxxx>
  • To: arachne@xxxxxxxxxxxxx
  • Date: Sat, 29 Dec 2007 16:00:54 +0700
Arachne at FreeLists---The Arachne Fan Club!

Dear Glenn,
Have now tried out practically every combination of Arachne configurations.
From what I have learned of these exercises is that I have to ask for dhcp in 
order to get an reaction in my router modem program. 
A connection is up to now still way of.
As an example of today I send you the log file of the router setup program.
My remarks starts with # .
As far as I can see it the Arachne box is offered a connection but does not 
react as expected. There is no ACK (think means acknowledgment) following the 
offer so no connection. have no idea what this program is waiting for.
Same box with Baslinux is connected within seconds. 
Please have a look and if you have additional proposals, I will be glad to try 
them out.
-----------------------------------

# logged in http://192.168.2.1/login.stm the ADSL router setup
12/29/2007  14:05:01 192.168.2.100 login success
# connected my laptop 
12/29/2007  14:09:37 sending OFFER to 192.168.2.102
12/29/2007  14:09:42 sending ACK to 192.168.2.102
12/29/2007  14:09:57 DDNS> NULL was already set to 222.124.93.87
# was auto logged out of the router setup 
12/29/2007  14:58:14 192.168.2.100 login success
#
ran Arachne 
12/29/2007  14:59:06 sending OFFER to 192.168.2.101
12/29/2007  14:59:21 sending OFFER to 192.168.2.101

Arachne box is recognized, but an ACK is not send. There seems some 
conversation been missing between Arachne and the modem router.
The following information is from the status page of the router modem program.

VPI/VCI         1/33
Encapsulation   VC MUX
Protocol        PPPoA
IP Address      222.124.93.87
Subnet Mask     255.255.255.0
Gateway         203.130.222.255
Primary DNS     202.134.2.5
Secondary DNS   202.134.0.155

Current Time: 12/29/2007 03:02:00 pm

           INTERNET
ADSL:  CONNECTED
WAN IP:  222.124.93.87
Subnet Mask:  255.255.255.0
Gateway:  203.130.222.255
Primary DNS:  202.134.2.5
Secondary DNS:  202.134.0.155

        GATEWAY
IP Address:  192.168.2.1
Subnet Mask:  255.255.255.0
DHCP Server:  Enabled
Firewall:  Enabled
UPnP:  Enabled

        INFORMATION
Numbers of DHCP Clients:  3
Runtime Code Version: 
  0.13a (Aug 10 2006 13:30:56)
Boot Code Version:  0.74.0
ADSL Modem Code Version:  06.00.04.00A+
LAN MAC Address: 00-13-F7-65-7F-9A
WAN MAC Address: 00-13-F7-65-7F-9B
Hardware Version:  01
Serial Num:   J650002230


My Arachne configuration was with this trial as follows:

(arachne.cfg)
[dialer]
Dialer NULL

[tcp/ip]
IP_Address 222.124.93.87
IP_Grab IP address set to
NameServer 192.168.2.1
AltNameServer 
Gateway 203.130.222.255
AltGateway 0.0.0.0
Netmask 255.255.255.0
TCPconfig PPPRTR.CFG

(ppprtr.cfg)
my_ip = dhcp    
netmask=255.255.255.0
gateway=203.130.222.255
sockdelay=60
hostname=arachne
mss=1500 # read in the routersetup that this would be the preferred mss

Response from Arachne: Initializing TCP/IP
 and then                      : Unable to initialize TCP/IP   
                  Arachne at FreeLists
-- Arachne, The Premier GPL Web Browser/Suite for DOS --





[ Home | Signup | Help | Login | Archives | Lists ]

All trademarks and copyrights within the FreeLists archives are owned by their respective owners.
Everything else ©2007 Avenir Technologies, LLC.