Arachne at FreeLists---The Arachne Fan Club!
Bastiaan,
Since you have a modem/router (all in one).
Try this......
--- in arachne.cfg ---
[profile]
Profile ara-rtr.ACF
Connection READY
Hangup NULL
[dialer]
Dialer NULL
[tcp/ip]
IP_Address 192.168.1.65
IP_Grab IP address set to
NameServer 192.168.0.1
AltNameServer
Gateway 192.168.0.1
AltGateway 0.0.0.0
Netmask 255.255.255.0
TCPconfig PPPRTR.CFG
_________________________________________
---- in ppprtr.cfg ---
my_ip = 192.168.1.65
netmask = 255.255.255.0
gateway = 192.168.0.1
sockdelay=60
hostname=arachne
mss=1600
______________________
Since the 3rd number in the IP address you found is '1' ....
Also try 192.168.1.1 as both nameserver & gateway.
____________________________________________________________________
You could also try grabbing the IP & nameserver via DHCP like so....
--- in arachne.cfg ---
[profile]
Profile ara-rtr.ACF
Connection READY
Hangup NULL
[dialer]
Dialer NULL
[tcp/ip]
IP_Address WATTCP ;forces the use of only the TCPconfig file info
IP_Grab IP address set to
NameServer ;no nameserver in arachne.cfg, dhcp will get it
AltNameServer
Gateway 0.0.0.0 ;no gateway in arachne.cfg, put it in ppprtr.cfg
AltGateway 0.0.0.0
Netmask 0.0.0.0 ;no netmask in arachne.cfg, put it in ppprtr.cfg
TCPconfig PPPRTR.CFG
_________________________________________
---- in ppprtr.cfg ---
my_ip = dhcp ;gets IP address & nameserver from router via DHCP
netmask = 255.255.255.0
gateway = 192.168.0.1 ; as above..... also try 192.168.1.1
sockdelay=60
hostname=arachne
mss=1600
______________________
--
Glenn
http://www.delorie.com/listserv/mime/http://www.cisnet.com/glennmcc/http://www.law.cornell.edu/constitution/constitution.table.html
Arachne at FreeLists
-- Arachne, The Premier GPL Web Browser/Suite for DOS --
