FreeLists / arachne / [arachne] Re: hi speed connect

["Glenn McCorkle" <glennmcc@xxxxxxxxxx>]

Arachne at FreeLists---The Arachne Fan Club!

Just for the heck of it, try this......

[tcp/ip]
IP_Address 192.168.0.2
IP_Grab IP address set to
NameServer 209.226.175.152
AltNameServer 209.226.175.236
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig lantcp.cfg

And now that you have the correct DNS numbers.

Also try....

[tcp/ip]
IP_Address BOOTP
IP_Grab IP address set to
NameServer 209.226.175.152
AltNameServer 209.226.175.236
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig lantcp.cfg


On Fri, 13 Oct 2006 20:53:01 MST, destiny2b@xxxxxxxxxxxxxxx wrote:

> Trying out new Belkin pcmcia network card while at hotel.  Uses Realtek 8139
> chip.  Have card up and running using ne2000.com and a card
> enabler.   Could not connect via bootp.  Called hotel tech support and had 
> them
> issue a static ip.  Arachne says I am online and tech support sees my
> packets coming through.   Packet stats indicate all packets going out but
> nothing coming in.  Is it possible Arachne needs a router even when one
> has a static ip?   Below are config items as well as lantcp.cfg and 
> wattcp.cfg:

>    arachne.cfg

> Connection READY
> [tcp/ip]
> IP_Address 10.255.220.78
> IP_Grab IP address set to
> NameServer 209.226.175.152
> AltNameServer 209.226.175.236
> Gateway 10.255.1.1
> AltGateway 72.38.41.129
> Netmask 255.255.0.0
> TCPconfig lantcp.cfg

> All numbers from tech support and they can see my packets coming through.  Alt
> Gateway is from hotel router, Gateway from isp.  Changing
> around was no change

> Called a friend who I had setup Arachne on a cable modem.  Used his wattcp.cfg
> which is different from standard.  Still nothing.  Tech support could
> not give me a domain name, but checking hotel gateway for host info gave me
> domain name below.   Don't believe I should need one with static.

>    lantcp.cfg
> netmask=255.255.0.0
> gateway=10.255.1.1
> nameserver=209.226.175.152
> nameserver=209.226.175.236
> domainslist="cgocable.net"
> hostname=arachne
> sockdelay=30
> mss=1024

> Do not believe I needed to add info in above file from arachne.cfg but tried 
> it
> anyway.  No luck!

>    wattcp.cfg
> # Text printed to screen (stdout).
> #
> #print = "Waterloo TCP/IP setup"  ; optional key/value
> pkt.vector = 0x60   ; optional
> my_ip = $(MYIP)
> netmask = $(NETMASK)
> nameserver = 209.226.175.152  ; secondary DNS, optional
> nameserver = 209.226.175.236
> gateway = $(REMIP)
> domain_to = 0  ; optional
> dynamic_host = 0  ; optional
> inactive = 0  ; optional
> datatimeout = 120 ; optional
> debug = 0  ; optional
> #mss = 1460  ; optional
> #mss = 512  ; optional
> # Default value is 1500.
> #
> #mtu = 1500  ; optional
> #mtu = 552  ; optional

> The other box with Arachne on cable seemed to go nowhere without a router but
> am guessing on that.   Can someone confirm this?
> See anything I am missing?

>    Cal
-- 
 Glenn
 http://www.delorie.com/listserv/mime/
 http://www.cisnet.com/glennmcc/
 http://www.law.cornell.edu/constitution/constitution.table.html
                  Arachne at FreeLists                  
-- Arachne, The Premier GPL Web Browser/Suite for DOS --