|
[arachne]
||
[Date Prev]
[02-2008 Date Index]
[Date Next]
||
[Thread Prev]
[02-2008 Thread Index]
[Thread Next]
[arachne] Re: Setting up Arachne 193
- From: "Glenn McCorkle" <glennmcc@xxxxxxxxxx>
- To: arachne@xxxxxxxxxxxxx
- Date: Thu, 21 Feb 2008 18:04:54 -0500
Arachne at FreeLists---The Arachne Fan Club!
On Thu, 21 Feb 2008 17:22:24 +0100, Bastiaan Edelman wrote:
> On Wed, 20 Feb 2008 16:20:17 -0500, Glenn McCorkle wrote:
>>> After "Use New Settings" no connection to internet could be made (ADSL)
>>> "Error in TCP/IP configuration"
> Keying in the IP_Address 192.168.1.65 did go wrong after "OK" button.
> Looking again at the settings... the IP_Address box was empty!
> So I gave the IP-Address again in arachne.cfg manualy!
> But, do not use the wizard after that for the IP_Address is set back to
> BOOTP in arachne.cfg :-(((
Sionce you need to set a static IP ....
During the wizard setup, on this page....file:system\gui\etherwz2.ah
Pick 'Manual setup' which will take you to... file:system\gui\etherwz3.ah
Now you can set ....
Static IP address, the DNSs, netmask, gateway & altgatway.
--
Glenn
http://www.delorie.com/listserv/mime/
http://www.cisnet.com/glennmcc/
http://www.law.cornell.edu/constitution/constitution.table.html
Arachne at FreeLists
-- Arachne, The Premier GPL Web Browser/Suite for DOS --
|
|
