Hi Roland.......it is Peach again..........I forgot to say this part. When
I am in the process of fine tuning changes to a new design and I am sending
it to the OS software........I watch my stitch count as a precautionary
step. Usually after I have fine tuned a design.....the stitch count
changes.
Does any of what I am offering see to fit your problem?
Karen
Peachey Threads
It is the Peach
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish III
Sent: Wednesday, July 06, 2005 5:11 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Design Pro not saving changes
Here it goes again-and I've complained over and over to Denver and get the
reaction that I'm making it up-they don't believe me.... in working on the
design (for neckerchief) I've made repeated changes in the original in
Design shop pro, while I watch the design being sewn out (both programs
running on same computer at same time). When the sewout is done, I make any
finally changes to the original (such as line thickness, pattern changes,
underlayment, cut points, etc.) and then save the changes, usually as
'neckerchief1, neckerchief2, etc. Sometimes I just save in that version and
then 'send' the image to Amaya. As it has happened in other designs, when I
do the next sewout-the changes are NOT there-nothing is different. Easy to
tell-one part of the design I 'linked' several bars of same color together
with a manual stitch to keep the head down for speed-and it kept stopping,
cutting, and sewing the previous setup. Anyone else running into this? I
wasted about 2 hours of sewouts, changes, repeat sewout, new changes....then
realized I was continually changing the same things over and over. Line
width thicknesses were changing to different numbers-I had a 'border' set to
14, double checked all the 'pieces' and one had changed on its own to
17...lettering (Arial, .25 inch) set to 'NO' underlayment suddenly had
primary and secondary underlayment set in the 'fill' window after I set it
all to 'none'.... Help! Roland
