Browse amayausers: This Month's Archive • Main Archive Page • Related posts • Previous by Date • Next by Date
[amayausers.com] Re: Z Axis Time Out error

From: "r.rinehartsr" <drader@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Date: Wed, 2 Apr 2008 14:04:48 -0500
Thanks Tom!!  I need to do that soon cuz having two needles down is a real pain 
when you do a big jacket back!!   I have been saving names and numbers of other 
embroiderers in the central Indiana area just in case I get a large order and 
need to contract part of it out.  Would you be interested?  I work part time at 
a local hospital that gets shirts for all 600 employees each summer.  I've 
thought about putting a bid in, but need to know who locally could help me out. 
Email me at drader@xxxxxxxxxxxxx if interested.
Debbie Rinehart
Deb'z-N-Stitches
www.debznstitches.com
765-342-7392
  ----- Original Message ----- 
  From: Tom Ladow 
  To: amayausers@xxxxxxxxxxxxx 
  Sent: Wednesday, April 02, 2008 12:20 PM
  Subject: [amayausers.com] Re: Z Axis Time Out error


  Deb;

  I would ask Melco to have Ben Day come to your shop.  He is lives in Indiana 
near Indy.  His phone number is 317-354-7817.  I just had him here about a 
month ago for my extended warranty checkup.

   

  Tom L.

   


------------------------------------------------------------------------------

  From: amayausers-bounce@xxxxxxxxxxxxx 
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of r.rinehartsr
  Sent: Wednesday, April 02, 2008 2:12 PM
  To: amayausers@xxxxxxxxxxxxx
  Subject: [amayausers.com] Re: Z Axis Time Out error

   

  Tom,

  If you decide to get a tech in to check your problem, let me know cuz I think 
my sensor is going out.  Needle 16 & 15 are both down.  They just have one 
false thread break after another.  Is your machine under warrenty?  Mine is 
just 9 months old and they will probably assign a guy to come out and check my 
machine.  But, maybe since he is in the area, he may come by and see you at the 
same time.  Feel free to call at the number below if you need more info!

  Debbie Rinehart
  Deb'z-N-Stitches
  www.debznstitches.com
  765-342-7392

    ----- Original Message ----- 

    From: Tom Ladow 

    To: amayausers@xxxxxxxxxxxxx 

    Sent: Wednesday, April 02, 2008 9:08 AM

    Subject: [amayausers.com] Re: Z Axis Time Out error

     

    Debbie;

    I think this problem is a bit more complicated than the Z Error message 
itself.  I have reset design,  turned off machine,  hit the E Button, etc.  The 
machine comes back to life OK and the message is gone but when I start sewing, 
the needle hits the thread cutter blades in the needle hole and breaks off and 
of course the error message reappears..  It seems as though the cutter blades 
are not retracting out of the way,  then I get the Z Error message again when 
the needle hits the top of the blades..  I tried resetting the cutter blades 
with the arrows, but they don't move.  I hit the Trim Immediate command,  but 
they still don't move.

     

     

     


----------------------------------------------------------------------------

    From: amayausers-bounce@xxxxxxxxxxxxx 
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of r.rinehartsr
    Sent: Wednesday, April 02, 2008 11:17 AM
    To: amayausers@xxxxxxxxxxxxx
    Subject: [amayausers.com] Re: Z Axis Time Out error

     

    Tom, Sometimes I hit the e button and when I release it, all is fine!  But, 
I have also had to reset design on occasion, but if you do that make sure you 
write down the stitch # you are on and the position of design!!! Debbie in 
Martinsville. HTH

    Debbie Rinehart
    Deb'z-N-Stitches
    www.debznstitches.com
    765-342-7392

      ----- Original Message ----- 

      From: Tom Ladow 

      To: amayausers@xxxxxxxxxxxxx 

      Sent: Wednesday, April 02, 2008 8:26 AM

      Subject: [amayausers.com] Z Axis Time Out error

       

      I have a Z axis Time Out error message on my screen. I have turned off
      machine and restarted computer and machine but the message is still there.
      Any ideas?

      Tom L.
      Indiana

      -----Original Message-----
      From: amayausers-bounce@xxxxxxxxxxxxx
      [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
      webmaster@xxxxxxxxxxxxxx
      Sent: Monday, March 31, 2008 5:14 PM
      To: amayausers@xxxxxxxxxxxxx
      Subject: [amayausers.com] Re: Patches

      This message was posted by Carolyn on AmayaUsers.com. PLEASE DO NOT REPLY
      VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
      http://www.amayausers.com/boards/ultimatebb.php?/topic/6/89.html

      Hello everyone, I am looking for patches that will fit on the back of
      motocyle jackets.  The straight or curved ones.  I hope someone gets what 
i
      am talking about.  I am probably not describing them correctly.  

      Please help

      Carolyn

      =========================================================== 

      The AmayaUsers Mailing List
      Website: http://www.amayausers.com
      Discussion Board: http://www.amayausers.com/boards
      Subscribe/Unsubscribe: http://www.amayausers.com/list

      =========================================================== 


      =========================================================== 

      The AmayaUsers Mailing List
      Website: http://www.amayausers.com
      Discussion Board: http://www.amayausers.com/boards
      Subscribe/Unsubscribe: http://www.amayausers.com/list

      ===========================================================
References:

[amayausers.com] Re: Z Axis Time Out error
From: Tom Ladow
[amayausers.com] Re: Z Axis Time Out error

Other related posts:
