FreeLists / access-uk / [access-uk] Re: Trying to use CDEX 1.30

["Carol Pearson" <carol.pearson@xxxxxxxxxxxx>]

I did have to get them and CDEX wouldn't work until I did, so I would
suggest that you're possibly OK.

Sorry, I can't help much more.  It's been a while now since I got it
going and I just use it with no probs.


--
Carol
carol.pearson@xxxxxxxxxxxx 



-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of Andy Collins
Sent: 03 November 2004 08:33 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Trying to use CDEX 1.30


Carol - one other thing has just come to light from reading the help
file, 
where it talks about needing the aspi drivers for ripping from CD-ROM,
so 
maybe this is my problem, as I don't know if I have these or not. Can
you 
cast any light on this one?

Andy
----- Original Message ----- 
From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, November 03, 2004 7:22 PM
Subject: [access-uk] Re: Trying to use CDEX 1.30


Hi Andy,

I've sometimes heard "Jitter Error" but haven't noticed much when
listening on the CD.

I've also heard it's a good idea to silence or take out JAWS or other
speech programmes so that the processor isn't so hard at work.  I now do
this so don't know if there's jitter error or not.

You could look to see if there's a way to slow down the CD speed.  I
have a feeling there is but haven't had to look for ages.

HTH:


--
Carol
carol.pearson@xxxxxxxxxxxx



-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of Andy Collins
Sent: 03 November 2004 07:09 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Trying to use CDEX 1.30


Hi all -

This is the first time I've had a go with CDEX version 1.30; with a CD
in my burner, I open the CDEX programme, and hit F9 to extract to MP3,
something starts to happen, and JFW reports several percentage figures,
things like 50% max min, and 96 DB, and time elapse 0, and remaining
time 0, and then I get a jitter error and an abort button. I've used
different CDs, and it's just the same!

Love some help please!

Andy

** To leave the list, send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 01/11/2004


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 01/11/2004



** To leave the list, send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

-- 
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net 

** To leave the list, send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, send a message, to 
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 01/11/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 01/11/2004
 


** To leave the list, send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, send a message, to 
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq