FreeLists / access-uk / [access-uk] Re: Invalid Product code

["Carol Pearson" <carol.pearson@xxxxxxxxxxxx>]

Mark,

Following Steve's post, just a further thought.  Did you uninstall it from 
other machines.  I think you're only given so many (one or two) installs and 
have to do this before you can put it onto another machine.  Well, certainly 
that's the case with earlier versions of Office.
HTH:

--
Carol
carol.pearson@xxxxxxxxxxxx


----- Original Message ----- 
From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Monday, July 02, 2007 9:54 AM
Subject: [access-uk] Re: Invalid Product code


> Hi Mark,
>
> If you have another PC with it on, run Belarc Adviser on it, and then you
> will get the key.
>
> All the best
>
> Steve
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf 
> Of
> Mark Threadgold
> Sent: 02 July 2007 07:35
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Invalid Product code
>
> Steve, thanks.
>
> I am not doing the install myself, but I have had three sighted folks try 
> it
> on two separate machines and it still comes up with the invalid code 
> error.
>
>
> Mark Threadgold
>
> The probability of being watched is directly proportional to the stupidity
> of your act.
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf 
> Of
> Steve Nutt
> Sent: 02 July 2007 06:36
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Invalid Product code
>
> Hi Mark,
>
> The only thing I can think of is that you must be getting a character in 
> the
> code wrong.  The reason I say this, is that 2000 was never tied to the
> Internet, in other words, the code is between you and the CD.
>
> All the best
>
> Steve
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf 
> Of
> Mark Threadgold
> Sent: 01 July 2007 10:42
> To: accessuk list
> Subject: [access-uk] Invalid Product code
>
> Hi all.
>
> Trying to install my genuine version of Office 2000 Pro and it permanently
> tells me the Product Code is invalid.
>
> I have had this for some years now, and it has been installed successfully
> on at least three different machines of mine in the past.  I try it on two
> different ones now and it will not install as it says the Product Code is
> invalid.  I am actually using office 2003 but want to install Access from
> this disk.
>
> Any suggestions how this may be remedied, please?
>
> Mark Threadgold
>
> The probability of being watched is directly proportional to the stupidity
> of your act.
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq