[access-uk] Re: KEYNOTE OLD (OLD) SYNTHESIZER - FIRMWARE UPGRADES
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Date: Tue, 4 Jul 2006 13:34:12 +0100
Hi Carol,
Have you tried asking Humanware (Formerly Pulse Data)?
George.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol Pearson
Sent: 04 July 2006 13:25
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: KEYNOTE OLD (OLD) SYNTHESIZER -
FIRMWARE UPGRADES
Doris,
I thought it was flashable in the old days of DOS, but
perhaps even I have it wrong . . .. (It may be the Dectalk
I was thinking about.)
I want it to work with the Jaws 7 drivers but didn't get it
to do so.
Any help most welcome. I seem to be going round and round
in no end circles with this one!
Thanks, anyway, Doris for all you could tell me.
--
Carol
carol.pearson@xxxxxxxxxxxx
----- Original Message -----
From: "Chipmunks" <chipmunks@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, July 04, 2006 11:04 AM
Subject: [access-uk] Re: KEYNOTE OLD (OLD) SYNTHESIZER -
FIRMWARE UPGRADES
>A Keynote SA should work under windows. If you want to have
it work under
>win NT (nt/2k/xp) you need to donwload the appropriate
32bit driver from
>the humanware/Pulsedata website. it can be found somewhere
in the
>Braillenote support download section, the page where all
the firmware
>upgrade for the BN's can be downloaded from.
>
> I have had my Keynote SA since 1998 and am not aware of
there having been
> any firmware upgrades for it during that time. IN fact, I
never heard that
> the Keynote's chip was flashable.
>
> hth
>
> Doris
>
>
>
> At 10:52 AM 7/4/2006 +0100, you wrote:
>
>>Hi all,
>>
>>Has anyone anywhere got relevant software and performed
these upgrades for
>>the Keynote in order that it will work successfully with
Windows and
>>faster computers. Currently selling a couple of ours, I
have run into
>>this problem and remember only doing one upgrade, once,
early with the
>>synth in DOS. In those days I really didn't know whether
the upgrade had
>>taken or not.
>>
>>Any information (hand holding) anyone can give on this
would be more than
>>welcome. Thanks!
>>
>>--
>>Carol
>>cdp49a@xxxxxxxxxxxx
>>** To leave the list, click on the immediately-following
link:-
>>**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** access-uk-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on
the
>>** immediately-following link:-
>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.394 / Virus Database: 268.9.8/381 - Release
Date: 7/3/2006
>>
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Anti-Virus.
>>Version: 7.1.394 / Virus Database: 268.9.8/381 - Release
Date: 7/3/2006
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.1.394 / Virus Database: 268.9.8/381 - Release
Date: 7/3/2006
>
>
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
